Biometric Fingerprint Door Lock

Fingerpint Locks and Fingerprint Door handles give a fantastic level of access control to a home, office, Store, IT suite or just about any high security room or area.

The Sensor Biometric Fingerprint Lock is easy to install, quick, accurate and runs on just 4 AA batteries ie no wiring is required.

The door will automatically lock on closing, so we recommend using an overhead door closer. The door can be opened from inside by simply using the handle.

Easy Installation - just requires 4x AA Batteries

Latch options

Suitable for outdoor use

Sliding cover to protect from dust and water

Fingerprints can be stored in seconds

Additional Use of PIN Numbers for access

Up to 150 fingerprints can be stored plus 78 PIN Codes
Battery life of 15000 door openings

Data stored on non volatile memory even when batteries are being changed

Low Battery alert

Code Pad facility

Panic escape function and Emergency over-ride key

2 level user function if required (management and users)

Hold Open mode (the door can be left unlocked for free access)

Lock out function for higher security and privacy

If batteries become too low the lock can be temporarily activated with a standard external 9v battery

Biometric Fingerprinting locks and door acess have long been associated with the highest levels of security and access, but now we all can benefit from the security, speed and accuracy that this Sensor Lock provides.

The contemporary split finish design of the housing and door handles, support the high quality positive action on the sprung handle. Quite simply great value for money.




If batteries become too low the lock can be temporarily activated with a standard external 9v battery
External power input terminals for the 9v battery are located at the bottom of the front side

Technical

Fits door thickness approx : 40mm(1 ½ inches) to 60mm(2 3/8 inches)
External dimensions of lock approx : 70mm ( 2 ¾ inch) x 150mm(6inches)
Adjustable latches approx : 60mm(2 3/8 inches) and 70mm( 2 ¾ inches) backsets
Bright background for resolving residual film from fingerprints
Technical capture of the fingerprint : Optical
Scanning window size : 18.2mm(L) x 16mm (W)
Scanning time : 1 second
Recognition time : 1 second
Resolution : 560 DPI
Angle of finger application : 60 degrees
False acceptance rate : 0.0001%
False rejection rate : 1%
PIN code setting : Random
PIN code length : 8digits
Working temperature for fingerprint: -20c to 60c
Operating temperature for keypad : -30c to 70c
Working humidity : 10% to 97%
Weight : 2kg
When ordering this product it needs to be specified whether a left handed or right handed model is required
Available in SILVER only.